Home D Selection Method

Notch and thickness

These two points are also very important. Everyone knows that the standard thickness of the floor should be 18mm, but there are many 17.5mm floors on the market, but I am not saying that the effect of the 0.5mm floor will be affected. The key is that the 17.5mm floor is mostly Insufficient board or along-bending board is modified, and along-bending board is mostly not dried well or the stress problem is not solved. Such floor is dangerous, and its problems will be displayed after paving, which is manifested as arching , Corrugated, etc., and the length of the notch is another way for the manufacturer to cut corners. Since the floor area is calculated by the width and length of the board, the shorter the notch of the manufacturer, the wider the board will be. In this way, it is invisible. In this way, the cost is reduced, and by doing this, it is the consumers who cause damage. The notch on the floor is short, it is easy to produce noise, and the floor will squeak when stepped on.

Paint difference

There are roughly two kinds of paints on the floor market: pu paint and uv paint. When buying floors, you must ask about the type of varnish. Do not buy pu paint floors. It is extremely environmentally friendly. It emits both benzene and formaldehyde. High, the paint life is very short, it has long been banned in European and American countries. As for UV paint, it is divided into two types, one is ordinary bright surface spray UV paint, the other is roller UV paint (super wear-resistant Lacquer) spray UV paint requires frequent waxing. The life of the paint surface is generally 2 to 3 years (calculated based on the occurrence of greater effect degradation). Roll coating is just another process of UV paint, generally with a matte effect. It is pitted surface, and as for the super abrasion resistance of paint, aluminum oxide powder is usually added to the paint. This is an important point to distinguish between ordinary roller paint and super wear-resistant paint. Note on.

Floor name

No matter what floor you buy, you must ask the manufacturer to write the scientific name of the floor on the invoice and sales slip. This can also prevent you from being deceived. Once you find a problem with the name, you can definitely double the claim, such as teak, everyone Knowing that teak is a very precious wood, but in order to make money, manufacturers have many similar names such as teak king (actually picking Yamu), Brazilian teak (actually Jatoba) and many other similar names. In fact, they have nothing to do with teak at all, and the degree of luxury , The stability is far worse, but the color and pattern are slightly similar.

Negative package

The packaged products do not have a factory, register a brand, get other manufacturers to process, and pack their own brand. This is terrible. He can't grasp the quality at all. If there is a problem, he will push it to the manufacturer, making you anxious No way, of course he will say that I am produced by a big factory. The key is that you can guarantee that he will not process it in several factories at the same time? However, it is more at his will to do in a small factory. The quality can be good or bad, and the price can be high or low. Finding a manufacturer with a lower production cost is the eternal pursuit of packaged products. Once his products are exposed, he As long as you re-register a brand, find another manufacturer or don’t need to change the manufacturer at all, you can go on the market again. This is something that businesses with factories can’t do. The way to identify such flooring dealers is to first look at whether there is a factory address on the packing box and sign. Contract, when you pay the deposit, you need his manufacturer's phone number, tell him that I will order the floor from you, but I want to verify the manufacturer, if it is not true, you must return the goods to me (please write clearly on the sales slip). This is mainly to be careful when buying laminate flooring and multilayer solid wood composite flooring.

After the procurement process is completed, the floor is delivered by the manufacturer and installed at the door. At this stage, you must be careful. Many illegal businesses use this link to fool consumers. First, he will send the floor to the house and let you confirm the number of packages. Check the quantity, then move upstairs to start the installation. The trick is here. Some businesses have a few boxes on the floor with broken wood. Generally, you only look at the appearance, not all of them. His workers You will throw away the broken wood when you don’t pay attention, so the money for a few parcels of flooring is earned, and if the flooring is not enough, they will let you buy it again. This is still complicated. Some workers are directly in your house. Steal two or three packs of the floor and run away, so someone must supervise when installing the floor.